- Home
- Equipment
Refine by
Hm Trailers Agricultural Equipment & Supplies
8 equipment items found
Manufactured by:HM Trailers based inFyfield, UNITED KINGDOM
Our low loaders are built with 355 grade rectangular hollow section chassis rails running the full length of the trailer, with ribs running over them. The ribs run the full width of the trailer and are welded to the chassis and the side rails. This extra strength at the side rails enables wide loads to be carried. This woven structure forms a very strong chassis on which our low loaders are ...
Manufactured by:HM Trailers based inFyfield, UNITED KINGDOM
Interlocking channel sections form the basis of this trailer. Supporting the chequerplate floor which is treated with grit between paint coats to form a non slip finish. 2 inch drain valves at the rear corners ensure that there is no effluent allowed to escape during transport, allowing easy ...
Manufactured by:HM Trailers based inFyfield, UNITED KINGDOM
HM trailer chassis are made from 355 grade (structural) Rectangular Hollow Section (RHS). Root crop trailers are fabricated with a long chassis tipping at the back of the ...
Manufactured by:HM Trailers based inFyfield, UNITED KINGDOM
HM hydraulic beavertail low loaders are built on a 250 x 150 box section chassis, cross ribbed with box section across the top of the chassis to offer full support to the side rails allowing wide loads to be carried. This woven structure forms a strong and rigid chassis for these long ...
Manufactured by:HM Trailers based inFyfield, UNITED KINGDOM
A high tipping point aids the stacking of produce in the field. The chassis is built from 355 grade (structural) Rectangular Hollow Section (RHS), with 8mm steel used in the raised rear sub frame. The chassis is manufactured in a wide format for increased trailer stability. Rear anti jack rams are standard on the HMDT16, but extras on the smaller ...
Manufactured by:HM Trailers based inFyfield, UNITED KINGDOM
A combination of centre box section and channel side rails provides the platform for the implement trailer. The trailer is available with either a stepped rear section, or with a hydraulically lowering floor ...
Manufactured by:HM Trailers based inFyfield, UNITED KINGDOM
HM chassis is made from 355 grade (structural) rectangular hollow section. This gives greater strength and does not allow a build up of material on ledges. Supporting a single hydraulic ram for tipping. Made with clear panels to allow daylightinto the trailer to aid visibility. Highly recommended, especially with current slurry legislation to help with effluent run off. ...
Manufactured by:HM Trailers based inFyfield, UNITED KINGDOM
Our Bale trailers are built with a box section chassis, the rails running the full length of the trailer, with 4mm thick ribs running the width of the trailer to the side rails. This chassis design offers strength whilst at the same time keeping the weight down on the trailer for reduced soil compaction on ...